ELECTRONIC LEAK DETECTION 55975 III COMBUSTIBLE GAS LEAK DETECTOR DETECTS: Acetone, Acetylene, Ammonia, Benzene, Butane, Butanol, Chlorine, Ethane, Ethanol, Gasoline, Hexane, Hydrogen, Hydrogen Sulfide, Isobutane, Methane (natural gas), Methanol, Methyl Acetate, Methyl Chloride, Methyl Ether, Naptha, N-Butane, Pentane, Propane, Propanol, Sulfer Dioxide and Trichloroethane Intella Sense III Combustible Gas Leak Detector is packaged in a blow molded case with 2 “C” batteries, leak test vial and replacement filters SPECIFICATIONS • Sensing element: heated tin oxide • Sensor life: 2000 hours • Refrigerants: detects all refrigerants • Ultimate sensitivity: 50 – 1000 ppm * based on optimal laboratory conditions PROBE: • Intelligent tip, with environment sensing element to eliminate the potential of false alarms • Flexible 15.5 inch probe length for difficult to reach locations DISPLAY: Six vertical LED’s enabled selectively (red, yellow or green) to display the following information to the user such as: • The relative signal level of the detected leak • The selected sensitivity range (low, medium or high) of the unit • Diagnostic information (low battery, interference/wait, contaminated atmosphere readiness of the unit or fault conditions of the unit) KEYPAD CONTROLS: • ON/OFF, volume/mute, sensitivity for high, medium and low level selection, peak when multiple leaks are suspected 43707 COMBUSTION GAS LEAK TESTER KIT Fast, economical and accurate method to test for combustion gas leaks from head gasket, cylinder head & engine block. • Dual chamber for improved accuracy and to reduce the risk of coolant contaminating the test • Works on gasoline & diesel engines • Indicates that a leak is present when the tester fluid changes color • Test results in the top chamber will provide an indication of a combustion leak KIT INCLUDES: Test chamber with rubber bulb pump, combustion leak tester fluid and instructions packaged in a plastic box 43708 Radiator Cooling Test Cap Adapter with Vent Test cap adapter will provide a leak free secure connection to ensure the correct testing of the cooling system without the use of a rubber cone. Works with caps from Mastercool radiator test kits (43300, 43301, 43302, 43305 and 43306) 43709 Replacement Combustion Leak Tester Fluid Quickly check leaks between combustion chamber and cooling system • Response time: less than 1 second • Battery: 2 “C” alkaline 6000 mAh batteries • Operating temperature range: 0˚F to 120˚F 43710 COMBUSTION GAS LEAK TESTER KIT WITH TEST CAP ADAPTER Fast, economical and accurate method to test for combustion gas leaks from head gasket, cylinder head & engine block. Includes expansion tank adapter with vent allowing the end user to securely attach adapters to radiator or expansion tank when performing a combustion gas leak test. Quick connect coupler will attach to the radiator cap and expansion tank adapters in the Mastercool 43300, 43301-A, 43302, 43305 and 43306. The test cap adapter will provide a leak free secure connection to ensure the correct testing of the cooling system without the use of a rubber cone. • Dual chamber for improved accuracy and to reduce the risk of coolant contaminating the test • Works on gasoline & diesel engines • Indicates that a leak is present when the tester fluid changes color • Test results in the top chamber will provide an indication of a combustion leak KIT INCLUDES: Test chamber with rubber bulb pump, combustion leak tester fluid, radiator cooling test cap adapter with vent and instructions packaged in a plastic box 49
50 Online Touch Home