Tiles The rubber tiles we use provide a finished surface with similar properties as Wet Pour. The tiles are laid onto a prepared concrete base. The tiles are prefabricated, 1m x 1m, and are supplied in various thicknesses. The thickness of the tile used is dependent on the Critical Fall Height (CFH) of the equipment. The standard colour is black but the tiles are also available in red, green, and blue. All tiles comply with BS EN 1177 and BS 7188. Test Certificates are supplied for all thicknesses offered. Tile Thickness CFH 0.6m 0.9m 1.3m 1.4m 1.8m 2.0m 2.2m 2.6m 2.7m 20mm 30mm 40mm 45mm 50mm 55mm 60mm 70mm 80mm Impact absorbing rubber tile Existing ground level Pressure treated timber edging Pressure treated timber stake Tile adhesive Subbase: 100 mm concrete Quad Pavers Quad Pavers can be a cost effective way of providing a wear & tear resistant surface at small points of high wear. 20mm thick, hard wearing, black rubber tiles are bonded onto 50mm thick concrete paving slabs (600mm x 600mm). Quad Pavers can be installed flush into existing grass surfaces to provide a child friendly path or at points of high wear i.e. adjacent to Springers or at the end of Adventure Trails. Quad Pavers can also be used in conjunction with loosefill surfaces at points of high wear i.e. beneath swing seats or at the end of slides. Tel: +44 (0)15395 39770 enquiries@playdale.co.uk www.playdale.co.uk 183 Playground Extras & Surfacing
184 Online Touch Home